Welcome to Wenzhou Tiance Laser Equipment Co., LTD.
The Nd: YAG laser is a kind of rare earth element, which is a kind of rare earth element, which is used as the energy source (excitation source), Nd: YAG (Nd: YAG laser) YAG for yttrium aluminum garnet, the crystal structure and ruby similar) as the laser medium, the excitation source of specific wavelengths of incident light to promote the work of the material occurred home reversal, through the energy level to release the laser, the laser energy amplification and The laser beam can be used after shaping and focusing.
Semiconductor pumped YAG laser laser engraving machine
The semiconductor pump laser laser engraving machine is the use of a wavelength of 0.808um semiconductor laser diode (measuring surface or end) pumped Nd: YAG medium, the media produce a large number of inverted particles in the Q switch under the formation of 1.064um giant pulse Laser output, electro-optical conversion efficiency. Semiconductor pump laser laser engraving machine and lamp pump YAG just marking machine has better stability, power, do not change the lamp, and so on, the price is relatively high.
Fiber laser laser engraving machine
It is made up of three parts: laser, vibration lens and marking card. The fiber laser is used to produce the laser marking machine. The beam quality is good, the output center is 1064nm, and the life of the whole machine is about 100,000 hours. Compared with other types of laser marking Longer life, electro-optical conversion efficiency of 28% or more, compared to other types of laser laser engraving machine 2% -10% of the conversion efficiency of great advantages in energy saving and environmental protection and other aspects of performance.
CO2 laser laser engraving machine
CO2 laser is far infrared light band wavelength of 10.64um gas lasers, the use of CO2 gas into the discharge tube as the laser medium, when the high voltage on the electrode, the discharge tube glow discharge, gas molecules can be released A laser, the laser energy amplification after the formation of the material processing laser beam.
Laser laser carving machine
UV laser laser engraving machine equipped with deep ultraviolet laser, imported high-speed scanning galvanometer system, etc .; UV laser laser engraving machine focusing spot is very small, and the processing heat affected zone is minimal, and thus UV laser laser engraving machine can be ultra-fine marking, special Material marking, UV laser laser engraving machine is marking the effect of a higher demand for customers of choice products. Ultraviolet laser laser engraving machine has a high electro-optical conversion rate, non-linear crystal long life, machine running stable, high positioning accuracy, high efficiency, modular design easy to install and maintain. In addition optional two-dimensional automatic table, to achieve multi-station continuous marking or large format marking.
Yttrium aluminum garnet laser laser engraving machine
Activated media is solid, the laser emits near the infrared region of the 1060nm light waves, there are continuous, light pen two kinds, by changing the output energy, can be different intensity of the laser beam. Marking process with coking (dark mark), foam method (light-colored mark) and ablation method (engraving mark), mark the excellent quality. Excimer laser machine can emit ultraviolet range of light (100 ~ 400nm), activation of the media by the helium, argon, krypton, neon gas and chlorine, fluorine, bromine, iodine and other halogen composition of the mixture.
Green laser laser carving machine
Green laser laser engraving machine adopts side pump, different from the semiconductor end pump laser laser engraving machine, has obvious advantages: the wavelength of 532nm green laser output, focusing spot diameter smaller, more focused energy, electro-optical conversion efficiency, beam Good quality. Machine protection, marking control convenience, the use of PLC program control, to achieve one-button boot. Equipment is more suitable for the surface of glass carving, such as mobile phone screen, LCD screen, optical devices (such as optical lenses, etc.), automotive glass. At the same time can be applied to the vast majority of metal and non-metallic materials, surface processing or coating film processing, such as metal, ceramics, glasses watches and clocks, PC, electronic devices, various instruments, PCB board and control panel, nameplate panels, plastics. Compared with similar products with a very high price. His price is more expensive